ISO INTERNATIONAL STANDARD 10599-1 First edition 1992-11-01 Car radios - Coaxial aerial connectors Part 1: Dimensions Autoradios -Raccords coaxiaux'd'antenne Partie1:Dimensions Referencenumber ISO10599-1:1992(E) ISO10599-1:1992(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (Iso member bodies).The work of preparing International Standards is normally carried out through Iso technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with so, also take part in the work.Iso collaborates closely with the International Electrotechnical Commission (IEC)on allmatters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Inter- national Standard requires approval by at least 75% of the member bodiescastingavote. International Standard Iso10599-1wasprepared byTechnical Commit- tee ISO/TC 22, Road vehicles. Iso 10599 consists of the following parts,under thegeneral title Car ra- dios --- Coaxial aerial connectors: Part1:Dimensions Part2:Characteristicvalues,performancerequirements andtests ISO1992 or by any means, electronic or mechanical, including photocopying and microfim, without permission in writing from the publisher. International Organization for Standardization CasePostale56.CH-1211Geneve20Switzerland Printed in Switzerland ii ISO 10599-1:1992(E) INTERNATIONAL STANDARD Car radios --- Coaxial aerial connectors Part 1: Dimensions Details of the aerial connector not specified are left 1 Scope tothe manufacturer partofso10599laysdown dimensional This The design of the plug shall ensure that, when specifications of the plug and socket for the coaxial making the connection,the outer contacts and the aeriai connector of car radios for mounting in road plug housing are centred beforethe pin comes into vehicles. contactwiththetube of the socket. The connector shall meet the performance require- 2 Normative reference ments inISO10599-2. The following standard contains provisions which, Plug 3.2 through reference in this text, constitute provisions of this part of isO 10599.At the time of publication, Requirements forthe aerial connectorplug shall be the edition indicated was valid. Ail standards are as shown in figure 1. subjectto revision, and parties to agreements based on this part ofiso 10599 are encouraged to investi- 3.3 Socket gate the possibility of applying the most recent edi- tion of the standard indicated below. Members of Requirements forthe aerial connector socket shall IE and ISo maintain registers of currently valid be as shown in figure2. internationalStandards. 4 Designation Iso10599-2:—1,Car radios---Coaxialaerialconnec- Part 2:Characteristic values,performance tors An aerial connector plug which meets the require- requirements and tests. ments of this International Standard shall be desig- nated: 3 Dimensions Plug IsO 10599 3.1 Genera! An aerial connector socket which meets the re- quirements of this International Standard shall be The aerial connector shall meet the dimensional designated: specifications shown in figures s1and2toensure interchangeability. Socket Iso 10599 1) To be published. 1